Minecraft Circle Generator

Generate a pixel-perfect Minecraft circle of any diameter, with a block grid preview and counts.

100% FreeNo sign-upPrivate — runs in your browser

Odd diameters have a single centre block; even diameters have a 2×2 centre. The grid preview below shows filled blocks in orange.

Filled counts every block inside the circle; outline counts only the ring blocks you actually place for a hollow circle. For a dome or sphere, build the same circle at each height with a shrinking diameter.

—

blocks filled

Radius (blocks)
—
Filled blocks
—
Outline (ring) blocks
—
Grid size
—
Centre
—
Rows
—

Copied to clipboard

How to use this tool

1
Enter the diameter

Type the circle's width in blocks, for example 11.

2
Read the grid

Orange squares are blocks to place; pale squares are empty. Build row by row.

3
Choose filled or ring

Use the filled count for a solid disc and the outline count for a hollow ring.

4
Scale up

For bigger circles, place the centre first, then work outward row by row.

Formula & worked example

A block is inside when its centre is within radius d/2 of the circle centre. Filled = all inside blocks; outline = inside blocks touching an outside block.

Diameter 5: the grid has 21 filled blocks and a 12-block ring (rows: 3, 5, 5, 5, 3 blocks). Diameter 11 gives 97 filled blocks.

Limitations — read this before you rely on it

Pixel circles are approximations: a block is either in or out, so small circles look chunky and even diameters have no single centre block. The counts here use centre-distance, the standard method for Minecraft circle generators.

Frequently asked questions

Pick a diameter, then place blocks row by row following a pixel grid — this generator draws that grid and counts the blocks for you.

97 blocks filled, or 32 blocks for just the ring.

Odd diameters have one centre block and look symmetrical around it; even diameters have a 2×2 centre and suit builds centred on a 2×2 feature.

Yes: stack circles with shrinking diameters as you go up, mirroring them below the middle for a full sphere.

Very small diameters (under about 7) have too few blocks to look round. Use a larger diameter for a smoother curve.